characteristics: this style of relay is a tractive armature, dc current operated unit. it is specifically designed for use in lamp proving of 110vdc/33w triple pole signal lamps. sensitivity is achieved through a large iron circuit. a slug is also fitted to cover the transit time of its control relay. the contacts are silver impregnated graphite to silver (sig/sil). the relay conforms to brb spec 940a. the qecr2 is designed for use in lamp proving of 110vdc/12w led signal lamps. product range: product code rated amps dc contacts coil resistance (ohms) max full op. ma min rel. ma interuption time interlocking ms at ma QECR1-4841881 0.4 4f 4b 12.4 220 50 100 250 150 350 qecr2-4841893 0.2 4f 4b 45.5 80 55 100 132 abdhj cfkmx disclaimer: selectrix industries accepts no liability for the content of this document, or for the consequences of any actions taken on the basis of the information provided. selectrix industries reserves the right to alter info rmation contained within this document without notice. ? selectrix industries 2005 - all rights reserved www.selectrix.com QECR1 & qecr2 select rail tm a division of selectrix industries pty ltd
enquiries: all enquires for further information should be addressed to: selectrix industries pty ltd 2 merchant avenue thomastown vic 3074 australia phone: +61 3 9466 4244 fax: +61 3 9466 1169 web: www.selectrix.com a b c d 1 f f f f 2 3 b b b b 4 5 6 7 8 r1 c c r2 r3 r4 4f 4b contact layout: note: layouts shown are when viewed from the rear of the relay. disclaimer: selectrix industries accepts no liability for the content of this document, or for the consequences of any actions taken on the basis of the information provided. selectrix industries reserves the right to alter info rmation contained within this document without notice. ? selectrix industries 2005 - all rights reserved www.selectrix.com QECR1 & qecr2 select rail tm a division of selectrix industries pty ltd
|
